We wanted to create a lightweight portable display that customers could carry from venue to venue for their various exhibitions, and that would allow them to easily change the material they were displaying. It also needed to be low cost without being low quality so that it is accessible to everyone in need of a display board.
We begin by cutting the core using a computer programmed saw where we set the correct parameters so the saw cuts exactly to the size we require for the board. We use a lightweight core to ensure the product is easy to transport.
The aluminium crossbars & uprights are cut to the specific size and a silver powder cost is applied to finish the edges. We use silver aluminium framework to give an attractive finish to the board.
The self-adhesive fabric is then cut using guides on the table for exact sizing. The fabric is then applied to the core and the edges are trimmed to give a neat finish. The uprights and crossbars are then fitted into place.
Double and single rings are put into place to connect the boards together. These are what give the Event boards their flexibility. The boards are then secured using screws to make sure they are sturdy.
Our Event Display Board product labels are then applied, and every board is brushed down before packing. The boards are then put into polythene bags for protection and placed inside the box. We apply packing card to the top of the display boards to help prevent any damage.
Included with the Event Display Board are the instructions for assembly, Velcro dots so that you can displays your posters etc. and either foot pegs for the Table Top Display Board or locking clips for the 6-10 Freestanding Panel Displays to lock the top and bottom sections together, and a carry bag.
The printed lid is then fitted onto the box and it’s ready for dispatch.