| | Laminate Screens | | | | Laminate screens can be manufactured using either beech, grey or white High Pressure Laminate and are ideal if you need to partition of an area but require them to have a "wipe clean" surface. The Morton range of laminate office screens has a powder coated aluminium frame, which is exceptionally stylish and elegant providing a sleek look to any environment.
The Morton Laminate office screens are manufactured using an 18mm chipboard core with 2mm MDF board either side, then compressed together using immense pressure to strengthen the screen. Then your chosen laminate colour is glued and pressed onto both sides
The Laminate partition screens are manufactured using High pressure laminates (HPL), also known as plastic laminates. HPL is a one-step process that is produced by fusing together, under heat and pressure, multiple layers of kraft paper saturated with phenolic resin. This sandwich is fused with a layer of melamine saturated decorative paper, which is typically added at the same time the phenolic layers are being fused. Further value can be added to this type of overlay by including a very thin top sheet of clear or translucent alpha-cellulose paper heavily saturated with melamine resins. This additional layer, common in laminate flooring products, is used mainly with print patterns and adds additional wear resistance to the surface. Rap specify that all their Laminate Screens must be manufactured using this High Pressure Laminate to give a high quality finish to the Laminate Partition screens.
With over 30 years of manufacturing experience within the office screen and partitioning market, Rap are proud to present to you 3 very distinctive ranges of screens, which have been designed, developed and manufactured here at our premises in Peterborough. | |
| |
